PRODUCTS Your Location :  Home | PRODUCTS



RGT TrampleNew 1/10 Scale 4WD Reverse-DriveSystem Rock Crawler
Trample, a rock crawler, belong to RGT Crawler Series, is mainly designed for extreme climbing performance. Comparing to the previous released 1/10 scale RGT Rock Crawlers, Trample has been upgraded further on the chassis structure. Ackerman steering angle, all-metal gears, metal spool, extended wheelbase, output driveshaft of the gearbox and reverse drive design in the transmission system, all these are the biggest features. The reverse drive design can well resolve the axle effect during running. More, the swing travel could reach 50°, and Trample will not roll over when driving sideways within 55 degrees. Also, the upper and lower suspension travel can reach 40mm, and the maximum twist travel reaches 71mm. The Integrated axle housing and the super-size all-terrain tires make Trample having excellent climbing ability. Besides, you can fix up your own Trample, as there has more space for modification, especially the player who likes to DIY the steel roll cage, RGT Trample is a good choice. 

The Central Transfer Case adds the reverse gear set, then the front and rear driveshaft connected to the gearbox will rotate in different direction. So, when the Trample is running, the front driveshaft rotates in clockwise direction, and the rear driveshaft rotates in anticlockwise direction. The reverse drive design can well reduce the axle effect during running. More, it will really solve the whole balance, foot-lifting, head-up, roll over and so on.

Trample will be in RTR version.
Trampleis configured with powerful electrical parts, such as the RC550 17T super torque Motor, the Hobby Wing WP-1060 waterproof for crawler whichsupportsLiPO mode, 15KG waterproof servo with all-metal gear, 7.2V 2000mAh NiMH battery pack, and special 4-Channel Radio with Light Set Controlling function.
1. Ready to Run Version,2.4G Radio System,“HobbyWing” 60A waterproof Electrical Speed Controller,15KG Metal Gear Servo with Metal Servo Horn
2. Metal Transmission Gear ,
Front and Rear Reverse Drive Design in Transmission System
3. Integrated 3mm 6061 Alloy Angled Porous Chassis Plate
4. Integrated Axle Housing with Metal Gears, All Bearings, Steel CVA front steering
5. 6mm-Diameter Solid Steel Links disposed by Electroplating , having wear-resistant and counterweight character
6. Large Travel Oil filled Metal Shock Absorber
7. 145mm-Diameter all terrain Realistic Wheels, High Soft Grip Tyres, Easy to straightly climb up a slope more than 48°
8. RC550 High performance Carbon Brushed Motor, Different Size Pinions for option, Gear Ratio adjust to meet different requirement

Specification Parameter:

Length 511 mm
Width 295mm
Height 255mm
Wheelbase 285mm
Ground Clearance 95mm
Gear Ratio 36.9:1
Weight 2.76KG
Motor RC 550 17T Brushed
Servo Metal Gear Torque 15KG
ESC HW 60A waterproof
Transmitter 2.4GHz
Battery Ni-Mh 2000mAh 7.2V
Body Available

The last: CRUSHER
The next article: Desert Fox